Wastewater Flow Control Measurement Products

  1. OPTIMASS 7010 Coriolis Mass Flowmeter 9/16/2019

    The OPTIMASS 7010 is a high-end single straight tube Coriolis mass flowmeter. It is particularly suitable for demanding process and dosing applications involving gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. The Coriolis meter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

  2. OPTIMASS 3400 Coriolis Mass Flowmeter 9/16/2019

    The OPTIMASS 3400 is a cost-effective Coriolis mass flowmeter for accurate flow measurement of liquids and gases in a variety of demanding low flow and dosing applications (from 0.3 kg/h or 0.01 lb/min upwards). The OPTIMASS 3400 features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature –  even at very difficult process conditions with 2-phase flow.

  3. OPTIMASS 1400 Coriolis Mass Flowmeter 9/16/2019

    The OPTIMASS 1400 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids (up to 170,000 kg/h or 6,235 lb/min). The meter features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature – even at difficult process conditions with 2-phase flow.

  4. OPTIMASS 7400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 7400 is a high-end Coriolis mass flowmeter for demanding process and custody transfer (CT) applications. It is the ideal solution when it comes to high accuracy measurement of gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. 

  5. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.

  6. OPTIMASS 6400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for cryogenic media like Liquefied Natural Gas (LNG) with temperatures down to -200°C / -328°F as well as applications involving high operating temperatures (up to 400°C / 752°F) or pressures (up to 200 barg / 2900 psig).

  7. OPTIFLUX 6300 Electromagnetic Flowmeter 9/9/2019

    The OPTIFLUX 6300 is an electromagnetic flowmeter (EMF) for advanced hygienic applications in the food sector. The high-end flowmeter is particularly suitable for blending, dosing or filling applications where a high accuracy (±0.2% of measured value) is priority and extensive diagnostics are required. In addition, it can even be used for low conductivity liquids of ≥ 1 μS/cm (e.g. glucose, fruit concentrates). The 3A and EHEDG certified flowmeter comes with industry specific installation lengths. It has no crevices, gaps or blind spots and is specifically designed to stay clean and sterile. This way, it complies with the most stringent demands in the food and beverage industry.

  8. OPTIFLUX 6100 Electromagnetic Flowmeter 9/9/2019

    The OPTIFLUX 6100 is an electromagnetic flowmeter (EMF) for hygienic standard applications in the food sector. It is the ideal solution for all general flow applications where reliable flow measurement with mid-range accuracy suffices. The 3A and EHEDG certified flowmeter comes with industry specific installation lengths. It has no crevices, gaps or blind spots and is specifically designed to stay clean and sterile. This way, it complies with the most stringent hygienic demands in the food and beverage industry.

  9. OPTIFLUX 6050 Electromagnetic Flowmeter 9/9/2019

    The OPTIFLUX 6050 is an electromagnetic flowmeter (EMF) for basic hygienic applications in the food sector. It offers cost-effective flow measurement where an extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. The 3A and EHEDG certified flowmeter comes with industry specific hygienic adapters. It has no crevices, gaps or blind spots and is specifically designed to stay free of contamination. This way, it complies with the most stringent hygienic demands in the food and beverage industry.

  10. BATCHFLUX 5500 Electromagnetic Flowmeter 9/9/2019

    The BATCHFLUX 5500 is an electromagnetic flowmeter (EMF) for rotary or linear filling machines. It is the most accurate mag meter for filling applications with conductive liquids in the market and has established itself as the standard for volumetric filling units. Due to its unique ceramic measuring tube, the mag meter features the best repeatability and long-term stability. It can also be used in difficult applications like fibrous products, hot filling (up to +140°C / +284°F) and CIP/SIP processes.