Endress+Hauser Articles

  1. How To Apply And Maintain A Photometric/Colorimetric Analyzer
    5/21/2018

    Water resource recovery (WRR) plants must monitor ammonium and orthophosphate. Permitted levels for these nutrients in effluent discharge are becoming increasingly tight because state environmental agencies and the U.S. Environmental Protection Agency (EPA) are requiring dischargers to reduce the amount of nutrients in their effluent.

  2. How To Improve Test Accuracy With The Latest Sampling Technology
    4/25/2018

    Sampling and laboratory testing are major responsibilities for water professionals. Test results are used for process control, and ultimately to determine that water is safe for drinking, reuse, or discharge to the environment. Regulatory agencies rely on reported results for proof of permit compliance. So, obtaining representative, properly collected and preserved samples is the first critical step to ensure accurate test results.

  3. FMCW Or ToF? Which Radar Level Technology Is Best For Tank Gauging In Custody Transfer Applications?
    4/9/2018

    Measuring the level of tanks used to hold fluids for custody transfer can be expensive. This is not due to the cost of the measurement instrumentation, but to what inaccurate measurements can cost the company. Picking the right instrumentation for applications is important. Which radar level technology should you choose for tank gauging in custody transfer applications? Frequency Modulated Continuous Waveform (FMCW) or pulsed Time-of-Flight (ToF or PToF).

  4. Are You Experiencing Deviation Alarms In Your High Pressure Process Vessels?
    4/9/2018

    In this white paper, learn how to decrease alarms due to redundant level devices not matching, especially in applications with high pressure and/or high temperature. The importance of Gas Phase Compensation (GPC) and how it affects level readings of guided wave radar (GWR) devices is critical. The presence of polar gas also can have an effect on the accuracy of any GWR that does not have GPC when installed in applications where high temperature or pressure is present. This paper will discuss these issues and address how to overcome them.

  5. How To Save Costs With Simple, Effective Data Management
    3/28/2018

    Water and wastewater utilities must monitor numerous aspects of their systems on a continuous basis. Various instruments are used to measure these processes, producing volumes of data every day. Endress+Hauser is a leading supplier of products and services for process measurement and automation. Water Online spoke with three of Endress+Hauser's experts to find out how data loggers and managers can save costs while providing effective data management. 

  6. Endress+Hauser Introduces Proline Prosonic Flow E 100 Ultrasonic Flowmeter
    3/27/2018

    Endress+Hauser introduces the Proline Prosonic Flow E 100 ultrasonic flowmeter for measurement of flow, temperature and volume of process water—regardless of conductivity, pressure, density or temperature.

  7. Endress+Hauser Announces Picomag Electromagnetic Flowmeter
    3/6/2018

    Endress+Hauser announces the Picomag electromagnetic flowmeter, an in-line transmitter for measuring temperature and flow of conductive liquids in pipe sizes ranging from ½” to 2”, such as drinking and industrial water.

  8. Endress+Hauser Releases Memosens COS81D Dissolved Oxygen Sensor
    2/16/2018

    Endress+Hauser releases the Memosens COS81D hygienic optical sensor for measuring dissolved oxygen in fermenters and bioreactors used in the food, pharmaceutical and biotechnology industries, as well in drinking water and boiler feedwater applications.

  9. Endress+Hauser Introduces Heartbeat Technology For Analytical Transmitters
    1/30/2018

    Endress+Hauser offers Heartbeat Technology with its Liquiline CM44 and CM44R transmitters for use with Memosens pH and conductivity sensors. Heartbeat Diagnostics’ continuous analysis of transmitter/sensor system health status during operation enables recognition of related events when they occur.

  10. Endress+Hauser To Provide Free Training On Instrumentation To Military Veterans
    1/25/2018

    Endress+Hauser announces it will provide training to military veterans on process instrumentation, as part of the twelve-week Academy of Advanced Manufacturing (AAM) program offered by Rockwell Automation and ManpowerGroup.