Drinking Water Flow Control and Measurement Products
-
Hydroverse™ Water Meters
1/8/2020
Sensus Hydroverse™ water meters deliver industry-leading accuracy, flow range and low-flow sensitivity for commercial and industrial potable, reclaimed and raw water applications. Using proven electromagnetic metering technology, the Hydroverse meter is ideally suited to capture revenue from large commercial accounts, enable district/zone metering and measure export or raw water flow.
-
ally® Water Meters
1/8/2020
The Sensus ally® water meter is groundbreaking technology that sets a new standard in water distribution system management. This residential smart water meter features an integrated, three-state remote service valve for remote shut off, turn on and reduced flow. ally also has pressure and temperature sensors and alarms available.
-
HydroRanger 200
12/10/2019
The HydroRanger 200 gives you unparalleled ease of use, setup in under a minute, customer-driven features, and PROFIBUS DPV1- all to make your work simpler and to provide the reliability you have grown to trust in Siemens ultrasonic controllers.
-
QCT Series In-Line Ultrasonic Flow Meters for Low Viscosity Liquid Applications
11/29/2019
The compact QCT Series has no moving parts and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.
-
QLF Series In-Line Ultrasonic Flow Meters For Low Viscosity Low Flow Rate Applications
11/29/2019
The QLF Series in line ultrasonic flow meter has been specifically designed for low flow rate applications that require excellent accuracy & reliability. The compact QLF Series has no moving parts, non-wetted sensors and no obstructions in the flow stream to cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.
-
QEM Series In-Line Ultrasonic Flow Meters For Low Viscosity Liquid OEM Applications
11/29/2019
The QEM Series in-line ultrasonic flow meter has been specifically designed for applications that require excellent accuracy & reliability at an OEM price point. The compact QEM Series has no moving parts; this results in a very rugged, reliable and accurate flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its plastic and stainless steel construction makes it the meter of choice for many corrosive fluids.
-
EL 1222 Series Compact Insertion Mag Meter For Portable Installation
11/29/2019
The EL 1222 is a compact insertion electromagnetic flowmeter that can be used for temporary or permanent installations. Its compact size and bi-directional measurement capability delivers excellent accuracy for customers who do not want to or have space restrictions to install a full-bore meter. Typical applications include water network management, district metering and leak detection.
-
EL 500 Series Electromagnetic Flow Meters For Low Flow And Small Line Sizes
11/29/2019
The EL 500 Series flow meters allow accurate flow measurement in small lines sizes with very low flow rates. This meter series has five different sizes ranging between 1/8 to 3/4 inch. The flow tube is 316 stainless steel with NPT, ASIS 316 UNI 338 male threaded, triclamp / ISO 2852 or DIN 11851 connections. Connections and electrodes are supplied in 316L stainless steel as standard and are also available in Hastelloy C and Titanium on request.
-
EL 1100 Series Wafer Mag Meter For OEM Applications
11/26/2019
The EL1100 series of electromagnetic flow meters represent the state of the art for the accurate measurement for OEM process applications. This new generation flow meter utilizes an innovative structure to route the electromagnetic signal generated by the electrodes, providing a flow meter with an extremely wide measurement range. With no moving parts, the EL1100J provides a compact installation with wafer connections making it a solid choice for OEMs.
-
OPTISONIC 7300 Ultrasonic Flowmeter
9/16/2019
The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F).