Drinking Water Disinfection Podcasts

  1. Getting Chlorine Disinfection Right
    11/1/2017

    Of all the process considerations facing wastewater treatment operators, disinfection is one of the most important. In this exclusive Water Talk interview, Gary Lohse, Technical Sales Manager, Disinfection with De Nora Water Technologies, discusses how disinfection has become increasingly complex over time. Lohse reviews a host of selection criteria including target microorganisms, control strategies, disinfection by-products, capex and safety.

  2. Peristaltic Vs. Diaphragm Pumps
    7/29/2014

    Bill McDowell of Blue-White Industries, a supplier of chemical metering pumps and flow meters, recently sat down with Water Online Radio and explained the difference between peristaltic pumps and diaphragm pumps.

  3. LA Story: Advanced Treatment, Reuse Saves Scarce Water Resources
    9/24/2015

    Officials in Los Angeles have grown tired of importing water, which is an expensive, unsustainable response to the region's persistent drought. The smarter solution, they concluded, is to reuse local resources through advanced purification and aquifer recharge. But how do you ensure safety and efficiency before committing to a treatment technology? A unique piloting tool from Xylem’s Wedeco brand offered the city clear answers.

  4. UV-LED Technology: The Latest In Disinfection
    1/16/2014

    Dan Shaver, Business Development Manager at Aquionics, talks about the advantages of UV-LED technology for disinfection: low energy requirements, chemical-free and customizable design, and proficiency in solar or battery-powered applications.

  5. TrojanUV + Water Reuse (Audio)
    12/4/2011

    Jennifer Muller, municipal marketing director for TrojanUV, sat down with Water Online Radio for this live interview from the show floor at WEFTEC 2011 in Los Angeles. Muller talked about Trojan’s ultraviolet (UV) disinfection technology and how it lends itself to the important issues of water reuse and sustainability.

  6. Water Quality Comes Under The Consumer Microscope
    7/12/2017

    Water quality is getting a lot more scrutiny these days. And that’s a good thing says Russ Swerdfeger, Global Director of Memcor Product Management with Evoqua. Alongside his colleague Daryl Weatherup, Director of Marketing with Evoqua, Swerdfeger recently discussed the future of drinking water and the key issues and concerns facing the water industry right now with Water Talk.

  7. UV Examined (Audio)
    8/1/2013

    Adam Festger, Market Manager, Drinking Water and Environmental Contaminant Treatment for TrojanUV, highlights some of advances in UV technology over the last few years including UV groundwater treatment, UV chemical contamination treatment and UV lamp efficiency.

  8. A Sustainable Solution For Treating Contaminants
    11/13/2014

    There are a number of regulations in drinking water centered around emerging contaminants. Hexavalent chromium is one that you’ll see on the national marketplace.

  9. Drumming Up Chemical Injection
    10/24/2017

    The operating ranges for chemical injection need to be large because of the variability of flow in many treatment operations. As Bill McDowell, Vice President of Operations with Blue White Industries explains in this Water Talk interview, “You might be down to as low as 5 or 10 milliliters a minute and then one hour later; you might need to pump 15 gallons a minute out of the same pump and through the same sensor.”

  10. UV Disinfection With LEDs
    11/10/2014

    UV LEDs offer the chemical free disinfection of traditional UV while avoiding mercury lamps. In certain applications where customers are concerned about the potential hazards of mercury contamination in the water from a broken lamp, UV LEDs are interesting because they don’t contain any mercury content at all.