THE SINGER ADVANTAGE
 

At Singer Valve, we care about performance. That's why our control valves are manufactured to the highest quality so that you have one less thing to worry about.

 
Water Pressure Management In Agriculture   6 Valve Considerations For District Metered Areas   Water Online Radio: Inserting A Magnetic Flow Meter Into A Control Valve
Water Pressure Management In Agriculture   6 Valve Considerations For District Metered Areas   Water Online Radio: Inserting A Magnetic Flow Meter Into A Control Valve

SINGE VALVE PRODUCTS

Model 106-SPI-MV Single Point Insertion Flow Metering Valve Model 106-SPI-MV Single Point Insertion Flow Metering Valve

With over 100 years of combined waterworks experience, Singer Valve and McCrometer have teamed up to provide a unique solution for in-valve flow measurement.

Pneumatic Dynamic Lifter Relief Valve Pneumatic Dynamic Lifter Relief Valve

The Pneumatic Dynamic Lifter is a very responsive compact wastewater relief valve that can handle high pressures and uses a compressed air cylinder to hold the valve closed. This chamber is fitted with a relief pilot that is normally closed as long as the line pressure is lower than the set point. If pressure rises above the set point, the relief pilot opens, causing the air in the cylinder to vent, which in turn opens the valve. The valve closes drip tight when pressure falls below the set point.

Single Rolling Diaphragm Pressure Reducing Valve Single Rolling Diaphragm Pressure Reducing Valve

The SRD Pressure Reducing Valves provide smooth, steady and precise pressure control from maximum to virtually zero flow without the need for low-flow bypass valves. The effective area of a single rolling diaphragm remains constant so the bonnet is much smaller and lighter than a flat diaphragm version. A measured quantity into the bonnet control chamber always gives the same smooth movement of the inner valve through the entire stroke. A smaller bonnet also makes the valve lighter and safer for maintenance, while the smaller control chamber enables it to respond faster to changing pressures. By eliminating the seat chatter at low flows, the SRD avoids injecting small pressure pulses into the piping, which, over time, may increase leakage, losses or pipe bursts.

Model 106/206 PR Pressure Reducing Valve Model 106/206 PR Pressure Reducing Valve

The 106-PR and 206-PR series pressure reducing valves are based on the 106-PG or 206-PG main valves.

Model 106/206 PRSM Pressure Reducing With Integral Back Up Model 106/206 PRSM Pressure Reducing With Integral Back Up

The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system.

Model 2SC-PCO Dual Solenoid Control Valve For Positioning & SCADA Model 2SC-PCO Dual Solenoid Control Valve For Positioning & SCADA

The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve.

More Singer Valve Products

CONTACT INFORMATION

Singer Valve Inc

12850 87th Avenue

Surrey, BC V3W 3H9

CANADA

Phone: 604-594-5404

Fax: 604-594-8845

Contact: Mark Gimson

FEATURED ARTICLES

  • Visit Singer Valve At ACE17
    Visit Singer Valve At ACE17

    Speed over to our booth to see our innovative product line.

  • Top 10 Questions You Should Ask When Purchasing A Control Valve
    Top 10 Questions You Should Ask When Purchasing A Control Valve

    Automatic control valves, much like everything else we purchase these days, are not all created equal. Some fall into the high quality bracket with pricing to match, while others hover closer to the lower quality and price sensitive end of the scale. Unfortunately, when evaluating control valve prices, it is not always clear what you are being offered and what standards the valve actually meets. Here are a few questions to consider and ask the supplier to ensure you get years of trouble free operation that lasts longer than it takes the sales person to drive out of your parking lot!

  • A Guide To Eliminating Pipe Breaks
    A Guide To Eliminating Pipe Breaks

    Call it what you want, but a busted pipe spells nothing but T-R-O-U-B-L-E.

  • A Visual Guide To Troubleshooting Your Valves
    A Visual Guide To Troubleshooting Your Valves

    Water management professionals know all too well that problems arise — usually sometime after 2 a.m., or just as you’re walking out the door for a holiday weekend. No matter how well-prepared you are, or how sophisticated your system, sometimes you’re going to run into challenges. It’s simply the nature of the industry. When you experience an issue with your valves (especially when they’re failing to open or close as expected) your first instinct is to call the factory for support. While some cases may require factory assistance, this isn’t always the most efficient solution.

  • A Helpful Guide To The Benefits Of The Single Rolling Diaphragm
    A Helpful Guide To The Benefits Of The Single Rolling Diaphragm

    Reducing water loss and saving money are two of the highest priorities—and most consistent challenges—facing water professionals. Both of these issues stem from water pressure control.

  • Keeping Your Control Valves In Good Health
    Keeping Your Control Valves In Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. By Mark Gimson, Marketing Manager, Singer Valve

  • A Guide To Common Applications In Water Distribution Systems
    A Guide To Common Applications In Water Distribution Systems

    This short guide is intended to offer guidance on some of the common problems, applications and questions that arise from using automatic control valves in water systems.

More Articles

ABOUT SINGER VALVE

Since 1957 Singer Valve has been designing, manufacturing and distributing pilot operated diaphragm control valves.  With innovative technologies, the company provides solutions for water loss management, water conservation and urban water and wastewater distribution throughout the world.  By using quality materials and testing every valve and pilot before it is shipped, Singer Valve has an unprecedented track record for long lasting, easy to maintain solutions that work upon installation. 

Presented with a problem, a team of electronic, instrumentation and control valve specialists are relentless in their research and design to find the best solution. Some of our innovative products include:

  • Single rolling diaphragm technology offering superior low flow stability
  • Patented hydraulically controlled flow modulation valve 
  • Custom engineered anti-cavitation cages 
  • Pressure reducing valve with integral, secondary back-up system
  • Specialty pilots and options that solve the most difficult applications

For more information, go to www.singervalve.com, or click here to find a Singer Valve Rep Near You.