The RG-32 wireless rain gauge monitor is part of Telog's suite of wireless monitoring products. When you combine Teloger's Enterprise software with our wireless monitoring products you have a powerful system of wireless water infrastructure monitoring that is consistently delivering real-time data from the field straight to your desktop....imagine...your data on one platform straight to your computer screen....it IS possible and it's happening now with Telogers Enterprise.
Telog’s RG-32 wireless rain gauge establishes a new standard in low power, low cost wireless communication RTUs for rain gauge monitoring. Powered by a single user replaceable D cell lithium battery, the RG-32 continuously monitors the output of a tipping bucket rain gauge collecting rainfall data in user defined time increments then transfers the data automatically over a cellular network to a central host computer. The RG-32 can operate up to five years making on average two calls per day.
The RG-32 is available with a choice of three wireless communication technologies:
Packaged within a 6.5”x3”x2” NEMA 4x rated environmental enclosure, theRG-32 is small enough to install on the pole or mounting platform attaching the rain gauge. Because the antenna is enclosed within theRG-32, the only connection required is the rain gauge.
The RG-32 may be configured to call its host application on a schedule(e.g. once per day; every four hours, etc.) and/or on alarm (e.g. in response to a major rainfall event). Data may be stored in the recorder at user defined intervals (e.g. five minutes, one minute etc.) without concern for data loss because the recorder will store over 80,000interval totals before overwriting the oldest data.
Data Management Software/Service
The RG-32 is supported by Telog Enterprise and Telogers for Windows host application software. Telog also offers a Data Management Service for users who prefer to outsource the computer data collection and management tasks providing end-use information on a secure website.