Product/Service

Multiport Plug Valves

Source: Mueller Water Products
Multiport.jpg

The shape of the port, whether round or rectangular, is important from an understanding of what shape is best to efficiently manufacture plug valves. The issue of effective seat design plays a huge role in determining the shape of the port. In smaller size valves - up to 12" - the most cost effective approach to produce plug valves is with round ports.

As you get into larger sizes, the most cost effective approach to producing plug valves is with rectangular ports. However, this comes with a caveat. The more divergent from center the flow must take in a rectangular port, the greater the amount of head loss the valve generates.

To measure or compare one valve manufacturer to another in terms of head loss, the plug manufacturer who has the larger port width, on the surface, will have less head loss than a manufacturer with a narrower port width.

Combining simplicity of design with high quality manufacturing processes, the Pratt multiport plug valve provides high flow and large solids passage. A four inch multiport valve allows a 3” round solid to pass without compression. This fact permits smaller valves to be used without sacrificing flow integrity. In the unlikely event wear occurs between the plug face and the body seal, the plug can be adjusted externally with the turn of a wrench. The Pratt multiport valve is excellent for directional control applications. Drip tight shut-off is available by special request.