Field Pilot Testing by Filtronics
Once we have received your General Mineral Analysis, actual field tests determine the treatability of the water source. The purpose of the pilot testing is to verify removal efficiencies and ascertain the operating costs. Chemical feed rates and electrical costs are also determined during the process. All tested water samples are sent to an independent laboratory for verification of field testing. A pilot test provides the basis for the Filtronics performance warranty.
Once we have received your General Mineral Analysis, actual field tests determine the treatability of the water source. The purpose of the pilot testing is to verify removal efficiencies and ascertain the operating costs. Chemical feed rates and electrical costs are also determined during the process. All tested water samples are sent to an independent laboratory for verification of field testing. A pilot test provides the basis for the Filtronics performance warranty.
Filtronics “full scale” pilot units provide long term, real time data. The 20” unit is the smallest full size filter we manufacture. The unit provides approximately 2 square feet of filter area and can be applied to flows of 10 to 30 gallons per minute depending on the application. The unit is fully automated. All pilot tests include one technician on-site for up to five days to provide assistance and training. Full technical support is available by phone.
Applications
- Lake, reservoir and spring water filtration for turbidity and color
- Ground water under the influence of surface water
- Iron & Manganese Removal
- Arsenic Removal
- Radium and radionuclides removal
- Industrial recycle streams
- Cooling tower side streams
- Heavy metal waste discharge streams
- Pre-reverse osmosis filtration
- Pre-ion exchange filtration
- Ground water remediation
- Process water filtration