Water from cooling towers attracts and absorbs airborne contaminants on a continuous basis. Typically, 85% of suspended solids in cooling water and hot water loops are smaller than 5 microns. Scientific studies have shown that these small particles (5 microns and less) are the adherent contaminants fouling the water loop and process cooling system.
Manufacturing facilities are routinely reviewing their system's water quality and treatment levels to prevent early and rapid corrosion, scale and biological growth; leading to unplanned facility maintenance or shutdown and possible product failure. With time, these fine particles will have an impact on your manufacturing costs, operating costs and production losses, while diminishing the quality of your final product. Listen to our process cooling expert as he explores how you can reduce your total operating/maintenance costs while achieving your water reuse and sustainability objectives. Protect your facility, your investments and your bottom line!