Wastewater Disinfection Solutions
-
UVAS Plus sc UV Sensor
5/14/2024
Continuous UV 254 Absorbance/Transmittance measurements can be used to protect plant treatment processes from high organic loads. Analysis range of 50 mm probe is 0.01 - 60 m-1. Use for the following applications: protection of treatment plants from industrial dischargers, monitoring shock loads from internal plant processes, control of activated sludge processes, control methanol feed in BNR based on organic loading, final effluent monitoring and monitoring efficiency of UV disinfection processes.
-
CHEM-FEED® CFWS-1 – The Wall Mount Skid For Limited Floor Space Installations
6/3/2022
CHEM-FEED Wall Mount Skid Systems were designed and engineered using solid modeling tools for superior piping installation and easy component maintenance. Every skid is completely assembled, tested, and shipped directly to you.
-
PAX Mixers
1/22/2024
The PAX Mixer design is based on rigorous scientific analysis of fluid mechanical principles to achieve rapid disinfectant blend time. The mixers are designed for energy efficiency and engineered for ease of installation.
-
SedVac Sediment Removal System
4/28/2015
SedVac’s unique design funnels the sludge and scrapes the floor, resulting in consistent solids removal of 3 percent concentration while wasting less water than traditional pipe systems.
-
ReFleX™ Efficiency
4/16/2014
For both disinfection and TOC-reduction applications, NeoTech Aqua Solutions’ patented ReFleX™ UV chamber technology represents the state-of-the-art in high-efficiency UV systems by reflecting over 99% of the UV we generate back into the water.
-
Capital Controls® CHLOR-A-VAC® Series 1420 Chemical Industion Unit
10/15/2015
The Series 1420 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.
-
NeoTech D238™
4/16/2014
The NeoTech D238™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.
-
RapiSand™ Ballasted Flocculation System
7/23/2015
The WesTech RapiSand™ ballasted flocculation system is a high-rate clarification process combining rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand™ sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications.
-
NeoTech D328™
4/16/2014
The NeoTech D328™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.
-
NeoTech CU-4 X™
4/16/2014
The NeoTech CU4-X™ UV Water Treatment Control Interface is a remote and compact master controller capable of managing up to four NeoTech ultraviolet water treatment chambers independently and simultaneously.