Drinking Water Flow Control and Measurement Application Notes
-
LST200 Ultrasonic Level Transmitter: The Easy Choice For Intelligent Level Measurement
9/28/2020
In water and wastewater treatment applications, a product that offers simple commissioning, reliable operation, fast delivery, and easy maintenance offers tremendous customer value.
-
OPTIFLUX 2100 Electromagnetic Flowmeter
8/26/2019
The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. Installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.
-
Best-In-Class Solution For Straightforward Flow Measurement: SITRANS FS220
4/27/2023
The tried-and-trusted SITRANS FST020 transmitter has been upgraded to deliver enhanced performance, user friendliness and options for customization.
-
Process Optimization For Flow Measurement
4/29/2021
The Saalfeld-Rudolfstadt Association in Germany must rely on cutting-edge technologies that optimize flow measurement in order to allow for smooth processes and supply 82,000 inhabitants with clean drinking water.
-
FLUXUS F601 Portable Flowmeter
12/9/2014
The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.
-
Proline Promag W 400 Electromagnetic Flowmeter
8/3/2021
The Proline Promag W 400 electromagnetic flowmeter is a versatile standard flowmeter for the water and wastewater industry.
-
Coriolis Mass Flowmeter: CoriolisMaster FCB430 And FCB450
11/12/2015
CoriolisMaster FCB400 series of compact Coriolis mass flowmeters feature low pressure drop, high capacity, intuitive ABB common display, five modular I/O's and HART communication.
-
Reduce Or Eliminate Water Hammer With Valve Positioners
5/19/2022
Water hammer, which can occur in just about any pumping system and even steam systems, can lead to pipe breakage, equipment damage or even total system failure. Addressing water hammer at the source is the savviest and most cost-effective way to handle the issue.
-
OPTIMASS 1400 Coriolis Mass Flowmeter
9/16/2019
The OPTIMASS 1400 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids (up to 170,000 kg/h or 6,235 lb/min). The meter features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature – even at difficult process conditions with 2-phase flow.
-
SONATA Ultrasonic Meter
12/15/2020
Utilizing advanced ultrasonic flow measurement, the Sonata Ultrasonic Meter greatly improves low flow measurement compared to residential mechanical meters, making it an ideal solution for addressing Non-Revenue Water (NRW).