The ABS AFL series is a range of submersible mixed flow column pumps for direct installation in discharge pipes that save space and installation costs. They are intended for large flows and moderate heads for stormwater, land drainage and flood protection. The ABS AFL can handle sewage from commercial, municipal and industrial sources as well as liquids containing solids and fibrous material.
ABS submersible propeller pumps of the VUP series are ideal for applications where large volumes of waste or process water have to be pumped up to heads of 39 ft.
Choosing ABS as a partner for dewatering will bring you much more than just the right pump. Our dewatering philosophy is to provide you with the best total combination of expert advice, purchase or rental contract and service support for each specific situation or demand.
ABS controls and control systems are designed for integration with the ABS pumps and accessories. Our controls utilize state of the art assembly techniques and tools.
The scavenger 4/10 and 1/2 hp sizes include both effluent and sewage ejector pumps. These pumps have high torque capacitor motors to ensure clog free operation by instantaneously clearing up debris in the volute upon start up.
Sewage pumps with shredding action used for reliable and economical discharge of effluent under pressure, using small diameter discharge lines in communal schemes. For effluent removal from houses especially in rural areas where high ground must be overcome, or where only small diameter pipework can be laid.
The ABS RW mixers have an integral motor and are suitable for agitating, blending, mixing, dissolving and suspension of solids in municipal treatment plants, industry and agriculture.
The ABS turbocompressor HST provide pressurized air to the aeration system. The ABS HST is an integrated turbocompressor based on a high speed motor driven by a frequency converter. No mechanical wearing parts or lubricants are used in the HST.
These models PE4 and PE5 (100J to 501U) of our ABS EffeX range are designed specially for use in engineered pumping stations. They are equipped with premium-efficiency (IE3) motors ranging between 17 to 125 kW (23 to 168 hp).
The WET Products and Systems group offers a full range of commercial and industrial reverse osmosis systems for any application requiring dependable, high purity water purification.
Godwin Sub-Prime® electric submersible pump line features dewatering, trash, sludge, and slim line models for immediate rental or sale.
The Goulds 3393 Pumps are designed for world class efficiency and reliability containing precision cast components, and a modular design available with either end or radial suction configurations and specifically with multiple nozzle orientations for radial suction pump arrangement. Goulds 3393 Pumps can be deployed in a variety of applications such as: reverse osmosis, boiler feed, cogeneration, shower/spray service, pressure boosting and high pressure cleaning.
The PrimeGuard™ Controller is a fully programmable control system that allows users to vary pump and diesel engine speed based on input from level, flow, pressure transducers or standard floats. This allows your Dri-Prime® pump to start and stop automatically without an operator.
In celebration of the 40th anniversary of its automatic self-priming Dri-Prime® pump line, Godwin Pumps will introduce the newest addition to the HL series – the HL260M Dri-Prime pump – at WEFTEC 2010. Capable of flow rates to 4,760 GPM (1,081 m3/h) and heads to 500 ft (150 m), the 10 in x 8 in (250 mm x 200 mm) HL260M is a single-stage, automatic self-priming centrifugal pump with solids handling capability to 2 in (50 mm) in diameter.
When electric submersibles and generators fail in a lift station, pumping stops and you run the risk of costly Sanitary Sewer Overflows (SSOs). Risk no more with a Godwin Dri-Prime® Backup System (DBS™).
