Downloads

  1. LuminUltra Water (QGA™)
    5/27/2016

    Using a single analysis, LuminUltra Water (QGA) provides a rapid and interference–free determination of total microbiological concentration in any filterable water sample with a wide detection range. Use this test kit to perform source-to-tap surveys and characterize complete systems, identify areas of concern, and validate corrective action – all in the same shift!

  2. LuminUltra Water (QGA™) Test Kit Datasheet
    5/27/2016

    The LuminUltra Water (QGA) test kit is based on the measurement of ATP, and is designed for low-solids, low-biomass concentration applications.

  3. Math Solutions: Combining Concentrations
    5/27/2016

    “Wastewater Dan” instructs operators on how to perform calculations for combining concentrations.

  4. Electrowinning 101: What Is Electrowinning?
    5/26/2016

    Electrowinning is a widely used technology in modern metal recovery, mining, refining, and wastewater treatment applications.

  5. CT5100 Continuous Gas Analyzer
    5/26/2016

    Rosemount CT5100 continuous gas analyzer from Emerson Process Management is the world’s only hybrid analyzer to combine Tunable Diode Laser (TDL) and Quantum Cascade Laser (QCL) measurement technologies for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas. Both can house up to six lasers to measure up to 12 critical component gases and potential pollutants simultaneously within a single system - meeting local, state, national, and international regulatory requirements. The CT5100 is a unique combination of advanced technology, high reliability, and rugged design. Its "laser chirp" technique expands gas analysis in both the near- and mid-infrared range, enhancing process insight, improving overall gas analysis sensitivity and selectivity, removing cross interference, and reducing response time. The laser chirp technique produces sharp, well-defined peaks from high resolution spectroscopy that enable specificity of identified components with minimum interference and without filtration, reference cells, or chemometric manipulations.

  6. CT5100 Continuous Gas Analyzer Brochure
    5/26/2016

    The Rosemount CT5100 continuous gas analyzer is the first Quantum Cascade Laser (QCL) system developed for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas.

  7. Plant Experiences “Phenomenal Improvement” With Fine Screen Retrofit
    5/25/2016

    Spanish Fork WWTP utilizes the STEPSCREEN® in two identical headworks systems. The technology upgrade has made a vast difference in plant processing. Prior to the implementation of new technology, only one channel was processed.

  8. STEPSCREEN® Fine Bar Screen
    5/25/2016

    Huber Technology, through its subsidiary Huber-Hydropress, is the inventor of the STEPSCREEN® concept. This design was unveiled in the early 1980’s to much acclaim and was readily adopted into the designs of well over 3,000 facilities worldwide since the STEPSCREEN® introduction.

  9. Low Headloss Finescreen Makes Retrofit A Snap!
    5/25/2016

    The STEPSCREEN® has the highest hydraulic capacity of any fine screen due to its larger open surface area when compared to any other Fine Screen technology. Stepscreens works well for plant expansions replacing coarse screens.

  10. Are You Monitoring The Biomass?
    5/25/2016

    It’s the most fundamental aspect of biological wastewater treatment. Wastewater operators, process engineers and plant managers have traditionally relied upon suspended solid measurements to quantify biomass in their process.