Product/Service

Zero Liquid Discharge (ZLD) System

Source: Degremont Technologies

Zero Liquid Discharge (ZLD) System

Zero Liquid Discharge (ZLD) represents the ultimate cutting-edge treatment system for the total elimination of wastewater effluent into neighboring waterways.

Contact The Supplier
Click Here To Download:

Click here to visit our new Website

ZLD Specific Technology

The ZLD System removes dissolved solids from the wastewater and returns distilled water to the process (source). Reverse osmosis (membrane filtration) may be used to concentrate a portion of the waste stream and return the clean permeate to the process. In this case, a much smaller volume (the reject) will require evaporation, thus enhancing performance and reducing power consumption. In many cases, falling film evaporation is used to further concentrate the brine prior to crystallization.

Falling film evaporation is an energy efficient method of evaporation, typically to concentrate the water up to the initial crystallization point. The resultant brine then enters a forced-circulation crystallizer where the water concentrates beyond the solubility of the contaminants and crystals are formed. The crystal-laden brine is dewatered in a filter press or centrifuge and the filtrate or centrate (also called “mother liquor”) is returned to the crystallizer. The collected condensate from the membranes, falling film evaporator and forced-circulation crystallizer is returned to the process eliminating the discharge of liquids. If any organics are present, condensate polishing may be required for final cleanup prior to reuse.

Infilco Zero Liquid Discharge System Overview

ZLD technology includes pre-treatment and evaporation of the industrial effluent until the dissolved solids precipitate as crystals. These crystals are removed and dewatered. The water vapor from evaporation is condensed and returned to the process. This process may utilize all or part of five S.M.A.R.T. Zone™ engineering modules including pretreatment, membrane filtration, evaporation, crystallization and solids recovery. Each module can be executed in parallel to expedite the design and implementation process.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Contact The Supplier