Veolia Water Solutions & Technologies offers AQUAMOVE™ Services to Water Utilities requiring temporary or supplemental treatment equipment and industries using purified water for their production lines or utilities. AQUAMOVE can be deployed as stand-alone units or combined to form complete systems with state-of-the-art water purification technologies. Learn more.
Optimizing Water Treatment Plant Performance Using Light Scatter Tech By Hach Company
Two new particle detecting technologies have been developed to help optimize filter performance at water treatment plants (WTP). One nephelometer was designed to give simple, accurate, and rapid response to turbidity changes during a backwash cycle and while monitoring the filter effluent. The other nephelometer was designed specifically to monitor filter effluent.
Advantages Of Thermal Dispersion Switches For Pump Protection By Magnetrol International
Thermal dispersion switches use similar principles as thermal mass flow meters. Fluid carries heat away from the probe tip, reducing the temperature difference between a heated resistance temperature detector (RTD) and a reference RTD.
Disinfection Performance Testing Of High-Efficiency UV Water Treatment Chamber By J. R. Cooper, Ph. D. and Gwynne Cavender, NeoTech Aqua Solutions, Inc.
This is the second in a series of three white papers describing the design and performance of the NeoTech Aqua ReFlex™ treatment chamber. This paper describes the methodology used to verify the rated performance of NeoTech Aqua’s “D” series of ultraviolet reactors for water purification.
From The Editor
Q&A: GE Water CEO On The Future Of Reuse
Speaking on the state of the challenging water/wastewater treatment market — hampered in recent years by slow municipal growth — Heiner Markhoff, a leading voice in the water treatment technology market, sees “light at the end of the tunnel.” Find out why in this exclusive Q&A with Water Online.
Gorman-Rupp offers more than 400 submersible pump models, including submersible pumps for open pits and quarries, drilled wells and narrow openings, and solids-handling models for slurries and debris-laden models.
As far as industrial infrastructure goes, there's no construction material more widely used than concrete. Where concrete is subjected to aggressive chemicals or excessive loads, deterioration threatens the continuity of operations.
The OPTISONIC 3400 is a multipurpose, ultrasonic flowmeter for liquids in all industrial processes. It provides measurement of conductive and nonconductive low- and high-viscous liquids, from -200°C to +250°C media temperature, with accurate bidirectional measurement that starts from zero flow.