Signet 2551 Magmeter Flow Sensor
The Signet 2551 Magmeter is an insertion style magnetic flow sensor that features no moving parts. All versions are constructed of corrosion-resistant materials to provide long-term reliability with minimal maintenance costs. Utilizing the comprehensive line of Signet installation fittings, sensor alignment and insertion depth are automatic.
Downloads:
•Datasheet: 2551 Magmeter Flow Sensor
•Operation Manual: 2551 Magmeter Flow Sensor
The Signet 2551 Magmeter is an insertion style magnetic flow sensor that features no moving parts. All versions are constructed of corrosion-resistant materials to provide long-term reliability with minimal maintenance costs. Utilizing the comprehensive line of Signet installation fittings, sensor alignment and insertion depth are automatic. The 2551 is a cost-effective solution in conductive liquid applications involving particles, solids, fibers, etc. usually associated with industrial influent or effluent. Due to the lack of moving parts, the Magmeter lowers service and replacement costs dramatically. Installation is eased because the 2551 retrofits into the same sensor fittings used for the popular 515 and 2536 Signet Paddlewheel sensors, mounting the sensor in pipes ranging from DN15 to DN200 (0.5 to 8 in.).
Available in a variety of wetted materials such as Polypropylene and PVDF, the unit features 316LSS electrodes at the sensing tip, providing a level of corrosion resistance uncommon in most other fluid sensing technologies. This makes it ideal for applications in chemical processing, water and wastewater monitoring, scrubber control, etc.
Three output versions heighten this product's versatility: frequency, 4 to 20mA and digital (S3L). The frequency output allows for connection to the Signet flow transmit- ters, monitors, 8900 Multi-Parameter Controller (also accepts digital input), 8550 Flow Transmitter, 5600 Batch Controller, etc. The 4 to 20 mA signal version can connect directly into the Signet 5091 Current Monitor, PC, PLC or Data Loggers. A Set-Up Tool, part number 3-0232, is available to customize the analog output with application features such as K-Factors, engineering units, loop range, and perfor- mance settings such as averaging, sensitivity, noise rejection and low-flow cut-off.
Features
- No moving parts
- For DN15 to DN200 (0.5 to 8 in.) pipes
- Flow rate range 0.05 to 10m/s (0.15 to 33 ft/s)
- Accurate measurement even in dirty liquids
- Blind 4 to 20mA, digital or frequency output
- No pressure drop
- Corrosion resistant materials; PP or PVDF
Applications
- Chemical processing
- Water purification
- Water and wastewater monitoring
- Metal recovery
- Landfill leachate
- Commercial pools, spas and aquariums
- HVAC
- Scrubber control
- Neutralization
- Industrial water distribution
Downloads:
•Datasheet: 2551 Magmeter Flow Sensor
•Operation Manual: 2551 Magmeter Flow Sensor