Sensus accuMAG Commercial Water MeterSource: Sensus
The accuMAG meter meets and far exceeds the flow requirements of the most recent revision of AWWA Standard C701 class II. Each meter is performance tested to ensure accuracy compliance. The accuMAG meters meet NSF/ANSI Standard 61, Annex F and G.
The measurement principles of the accuMAG meter assure enhanced accuracy ranges, and a extended service life. The accuMAG meter has no restrictions as to sustained flow rates within its continuous operating range. The measuring tube allows for flows up to its rated maximum capacity without undue wear or accuracy degradation due to no moving parts.
The accuMAG meter consists of two basic assemblies; the measuring tube and the liner. The measuring tube consists of polyurethane coated steel housing and a nonmagnetic alloy tube with an obstruction-less cross section and a homogenous magnetic field. The liner of the measuring tube is made of Rilsan® and is resistant to corrosion, aging and abrasion.
The accuMAG electronic register can be supplied either attached to the meter or a remote design. In the remote design, the register can be installed (between 30 to 75 feet) on the wall or on a post. Additionally, the large character LCD displays AMR, Totalization and a Resettable Test Totalizer. accuMAG register features; AMR resolution units that are fully programmable, Pulse output units are fully programmable, Integral resettable accuracy testing feature compatible with UniPro Testing Assistant Programs, Large, easy-toread LCD also displays both forward and reverse fl ow directions. The accuMAG register has extremely low power consumption and with a sampling rate of 1/15 Hz, the water meter can operate for more than ten years before the batteries would need to be replaced.