Franklin Electric Displays Multiple New Innovations At WEFTEC 2015

Franklin Electric Co., Inc. a manufacturer of complete pumping systems, will display multiple new pumping innovations at the WEFTEC 2015 Exhibition and Conference in booths 3652 and 3654 at McCormick Place in Chicago, Illinois September 28-30. A few of the new products featured in the booth include.

The new FPS IGPH Series of high head grinder pumps are engineered for the tough demands of higher head conditions found in many low pressure sewage transfer applications. Available in an automatic or manual version, the FPS IGPH Series of high head grinder pumps utilize a proven and patented cutter system with tight clearances for superior grinding at 414,000 cuts per minute. These new units incorporate two non-clogging impeller stages for efficient pumping of sewage slurries with a shut-off head of 200 feet. With only 16 full-load amps at minimum head requirements of 100 feet, these units can replace other grinders that fail to meet current application needs.

The new expanded VR Series line of vertical, stainless steel multi-stage pumps deliver clean water under pressure for a wide range of applications. These booster pumps are now available in 3, 5, 9, 15, 20, 30, 45, 65 and 95 m³/h options with a flow range up to 600 gpm and 750 feet of total dynamic head (TDH). Each pump features all 316 stainless steel hydraulic components for optimum durability, efficiency and performance – even in corrosive water applications. Impellers and diffuser stages are fabricated from heavy gauge stainless steel using advanced welding technology. The oversized ball bearing/coupler assembly eliminates the need for stack height adjustment and supports the axial thrust load. The elimination of axial thrust allows the VR Series pumps to utilize industry standard motors instead of the high-thrust motors commonly required in similar industry applications.

The new Pioneer Pump GT Series wet prime pumps are capable of running full diameter at over 2,000 rpm, making them ideal for waste water management in industrial, municipal and rental applications. Designed with a long pump life in mind, the GT Series pumps are constructed with ductile iron volutes and impellers and oversized 17-4 PH stainless steel shafts. The innovative hydraulic design includes a radically tapered stuffing box with strake, resulting in a cooler seal face, reduced abrasion and longer seal life. GT Series pumps can operate at high pressures without adding a secondary pump. They can run at higher speeds and are less susceptible to damage from cavitation without the added cost of a booster pump.

The new Little Giant Pit+Plus Basin is an advanced, installation and service-friendly sewage basin option for plumbing contractors. The Little Giant Pit+Plus features a monolithic top to separate and promote the three key areas of a sewage package – the pump, switch and plumbing connections which can be accessed independently. Still offered with the common float switch, the system was recently redesigned to incorporate the extremely reliable and new ECM (External Control Module) switch option. It contains a ‘bell’ inside the basin to monitor liquid level for switch operation outside the basin, isolated from the liquid.

About Franklin Electric
Franklin Electric is a global leader in the production and marketing of systems and components for the movement of water and fuel. Recognized as a technical leader in its products and services, Franklin Electric serves customers around the world in residential, commercial, agricultural, industrial, municipal, and fueling applications. For more information, visit www.franklinwater.com.