The U.S. Environmental Protection Agency (EPA) recently finalized standards to protect billions of fish and other aquatic life drawn each year into cooling water systems at large power plants and factories. This final rule is required by the Clean Water Act to address site-specific challenges, and establishes a common sense framework, putting a premium on public input and flexibility for facilities to comply.
An estimated 2.1 billion fish, crabs, and shrimp are killed annually by being pinned against cooling water intake structures (impingement) or being drawn into cooling water systems and affected by heat, chemicals, or physical stress (entrainment). To protect threatened and endangered species and critical habitat, the expertise of the Fish & Wildlife Service and National Marine Fisheries Service is available to inform decisions about control technologies at individual facilities.
“EPA is making it clear that if you have cooling water intakes you have to look at the impact on aquatic life in local waterways and take steps to minimize that impact,” said Nancy Stoner, acting Assistant Administrator for Water at EPA.
The final rule establishes requirements under the Clean Water Act for all existing power generating facilities and existing manufacturing and industrial facilities that withdraw more than 2 million gallons per day of water from waters of the U.S. and use at least 25 percent of the water they withdraw exclusively for cooling purposes. This rule covers roughly 1,065 existing facilities –521 of these facilities are factories, and the other 544 are power plants. The technologies required under the rule are well-understood, have been in use for several decades, and are in use at over 40 percent of facilities.
The national requirements, which will be implemented through National Pollutant Discharge Elimination System (NPDES) permits, are applicable to the location, design, construction, and capacity of cooling water intake structures at these facilities and are based on the best technology available for minimizing environmental impact. The rule establishes a strong baseline level of protection and then allows additional safeguards for aquatic life to be developed through site-specific analysis, an approach that ensures the best technology available is used. It puts implementation analysis in the hands of the permit writers so requirements can be tailored to the particular facility.
There are three components to the final regulation
For more information, visit http://water.epa.gov/lawsregs/lawsguidance/cwa/316b/.
SOURCE: The U.S. Environmental Protection Agency (EPA)