The MEMCOR CP II System from Evoqua Water Technologies is a pressurized, pre-engineered membrane system with a modular building-block configuration and ultra-compact footprint. Building on 25 years of experience, MEMCOR CP II is the next evolution of the MEMCOR product family. It utilizes the latest enhanced PVDF UF membrane technology, and features design enhancements that reduce installation costs, improve system performance, and simplify operations.
MBRs Address Failure Of Local Septic Systems By Ovivo
This project brief highlights how the town of Alpine utilized a CWRSF loan to replace the existing WWTP and address the failure of several local septic systems with MBRs.
The Basics: Testing RO Quality By Myron L Company
Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water, until a near equilibrium is reached.
Deoxygenation Of Low-Salinity Water For Polymer Flooding By Membrana
Polymer flooding using low salinity water has been shown to improve oil reservoir recovery rates by altering the reservoir characteristic from an oil-wet state to a water-wet state. It has also been shown to be cost-competitive with other enhanced oil recovery (EOR) processes. The combined cost savings and increased recovery rate have prompted a lot of attention in the polymer flooding process with low-salinity water in recent years.
Microfiltration And Ultrafiltration Water Treatment System Degremont's Smartrack Microfiltration and Ultrafiltration Water Treatment System is a universal rack with interchangeable MF/UF membranes. It's capable of handling the four principal module supplier brands found on the market — ASAHI, DOW, GE, TORAY — as well as interpiping to allow switching the filtrate/concentrate exits.
The ZENITH 30X series ozone generator platform is specifically designed for larger installations with mission-critical capacity and redundancy needs. The design features of the Zenith 30X system can provide up to 99.9996 percent operational readiness, along with other standard features.
The SPI Mag Insertion Flow Meter provides a highly cost-effective solution for the accurate measurement of liquid flow in closed conduit, pressurized pipe applications. The SPI measures forward flow only and is suitable for line sizes from 2 to 96 inches.
A new set of global asset management standards were recently released that will make it easier for water utilities and other organizations to improve the management of their assets, as well as the overall effectiveness of their daily operations.