2000 C Actuator- Automatic Control For Ton Cylinder Valves

The Model 2000C is an actuator system to automatically open and close the valve on chlorine or sulfur dioxide ton cylinders.

The system includes a battery operated actuator with electric motor that rotates the valve stem toward open or closed position for alignment, tests, and remote operation. The actuator is designed to mount without interfering with or requiring yokes or additional adaptors for dispensers or discharging hardware. The motor, gears, and controls are assembled as one unit.

Capabilities

• Battery operated with trickle charger
• Optional integral leak detection for automatic shutdown
• Remote control by leak detector, panic button, or other digital signals such as PLC or computer
• Easy to install or remove
• Can be used on chlorine and sulfur dioxide containers
• Can be part of an automatic changeover system to permit only one container in service at a time
• Eliminates the need for scrubbers in certain applications per the Uniform Fire Code

Features
The system includes a remote power supply enclosure for trickle charge of the batteries. Placement of the actuator can be accomplished by connection to the cylinder valve with an easy on/off latch. Monitor and controls are accomplished through an on-board microprocessor with integral LED displays for CLOSED, ALIGN, and OPEN. The LED display enables the operator to easily read the condition when mounted outdoors with bright sunlight. Programming is accomplished through an integral keypad. Valve position is transmitted to the microprocessor from a direct-coupled potentiometer and displayed in Degrees Open.