Datasheet | December 30, 2010

Datasheet: ABS Hydrostatic Sensors HSC2

Source: Sulzer Pumps Solutions Inc.

HSC2 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of high accuracy. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the HSC2 gives a 4 to 20 mA output signal which is proportional to the level of the liquid.

The output signal can be connected to the mA - input of set point relays, chart recorders, indicating instruments, PLC, pump-controls, etc. The number of devices in series and the length of the cable from sensor to the devices is dependant on the supply voltage. The ceramic sensing element can withstand very high overpressures without damage. Furthermore the sensor can be connected to a PC via the CB2 connection box for calibration and/or scaling of the mA output signal.

For full access to this content, please Register or Sign In.

Access Content Datasheet: ABS Hydrostatic Sensors HSC2