DensaDeg® 4D for CSO/SSO

The compact DensaDeg 4D Stormwater Unit combines four fundamental stormwater clarification functions in a single compact unit: 1)grit removal, 2)grease and oil removal, 3)integrated coagulation and flocculation followed by plate settling, and 4)sludge densification and thickening

Click here to visit our new Website

Click Here To Download:
•Brochure: DensaDeg® 4D For CSO/SSO

The compact DensaDeg 4D Stormwater Unit combines four fundamental stormwater clarification functions in a single compact unit: 1)grit removal, 2)grease and oil removal, 3)integrated coagulation and flocculation followed by plate settling, and 4)sludge densification and thickening. High rate physical and chemical treatment of stormwater flows can be achieved at rise rates in excess of 60 gpm/ft². Solids removal efficiency is typically greater than 85% and effluent exhibits low SS, COD and BOD5.

• External recirculation of concentrated sludge means rapid startup and low sensitivity to load variations.
  
• No additional thickening equipment is required.
  
• Automatic control of functions such as sludge draw-off and automatic metering of reagent quantities ensures low-cost operation.
  
• No abrasive material is added to the system, eliminating storage, recovery, and replacement.

With its hydraulic loading management, Infilco Degremont's DensaDeg 4D accommodates a wide range of flow rates associated with unusual high peak levels during storms. Pre-screening with our Climber Screen® Mechanical Bar Screen is typically all that is required.

Click Here To Download:
•Brochure: DensaDeg® 4D For CSO/SSO