Product/Service
CLT - In-Channel Screens
Source: IPEC
CLT Series of In-Channel Screens are designed for in-channel placement and include the following models: the CLT, a shaftless screw conveyor with compactor; and the CLT-A, a shaftless screw in-channel screen with compactor and agitator
CLT Series of In-Channel Screens are designed for in-channel placement and include the following models: the CLT, a shaftless screw conveyor with compactor; and the CLT-A, a shaftless screw in-channel screen with compactor and agitator.
This chart is only to be used as a guide. For specific sizing enquiries, please contact IPEC.
Method of Operation
The influent enters on the upstream end of the screening section and flows through the wedgewire, or perforated screening media, where the solids are captured. The solids are picked up by a brushed shaftless screw and transported to the surface by a screw compactor, where they fall into a dumpster or are transported away by conveyor. The CLT-A has a hydraulic drive agitator on the screen base for agitation and break up of loosely held organic solids.
Options
- 304 stainless steel construction
- 316 stainless steel construction
- wedgewire or perforated plate
- openings from 0.020" to 0.750"
- control panel with shower control & auto-reverse
- heat tracing
| Model | Screen Width | Channel Width | Water Depth | 1 mm 0.040" | 2 mm 0.080" | 3 mm 0.132" | 4 mm 0.157" | 5 mm 0.197" | 6 mm 0.235" |
| CLT 250 | 8" | 12" | 14" | 160 | 190 | 240 | 270 | 290 | 350 |
| CLT 300 | 12" | 15" | 18" | 190 | 240 | 290 | 330 | 360 | 440 |
| CLT 400 | 15" | 18" | 20" | 240 | 360 | 440 | 490 | 650 | 780 |
| CLT 500 | 20" | 24" | 24" | 320 | 460 | 700 | 790 | 980 | 1080 |
| CLT 600 | 24" | 30" | 30" | 380 | 520 | 970 | 1110 | 1270 | 1410 |
| CLT 700 | 30" | 36" | 36" | 430 | 490 | 1450 | 1660 | 1690 | 1850 |
This chart is only to be used as a guide. For specific sizing enquiries, please contact IPEC.
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
