| Case Study: A New Technology Utilizes The Collection System As An Active Part Of The Wastewater Treatment Process |
The collection system is often viewed as a means to transport the wastewater to the treatment facility. Many hours of retention time in the collection system have provided non-beneficial impacts to the wastewater treatment process. By In-Pipe Technology Company |
07/03/2009 |
36.8 KB |
| Case Study: Automatic Flushing: The Cost Effective Way To Improve Water Quality |
Consolidated Utility District (CUD), located in Murfreesboro, TN, is a large water system that encompasses over 13,000 miles of both urban and rural water lines throughout Rutherford County. By Teri Orr and Robert Galvin |
07/03/2009 |
25.7 KB |
| Case Study: Chemplast Chooses Aquatech’s HERO™ & ZLD |
The Chemplast Mettur plant uses the Cauvery River as
their main fresh water source. A strong industrial
growth in recent years has resulted in water scarcity in
the region. Industries are also required to follow strict
environmental norms for discharging effluents. The
intent of a Waste Water Treatment Plant was to have
complete treatment, recycle and reuse of the
combined waste water streams to reduce intake from
the Cauvery River while not discharging any liquid
waste streams. By Aquatech International Corporation |
07/03/2009 |
155.4 KB |
| Case Study: Mixing Eliminates Ice And Prevents Damage In New England Standpipe |
Ice formation inside steel potable water storage tanks is a common occurrence in the northern US and
throughout most of Canada during the winter. Depending on the average air temperature, the inlet
water temperature and the amount of turn-over, ice formation can range from a thin skin on the top and
northern walls of a water tank to a massive ice cap that weighs many tons. By PAX Water Technologies |
07/02/2009 |
977.1 KB |
| Automatic Flusher Cost-Benefit Calculator |
Kupferle Foundry’s automatic flushers can softly diffuse water atmospherically on the ground or through a direct discharge to a local sewer line, etc. To see how much Kupferle’s automatic flushers can save your utility, download Kupferle’s Cost-Benefit Calculator. |
07/01/2009 |
1.61 MB |
| Case Study: Redhook Ale Brewery |
Redhook contacted Biothane to investigate the applicability of using anaerobic digestion for treatment at their new Redhook-Portsmouth brewery in New Hampshire. By Veolia Water Solutions & Technologies
|
07/01/2009 |
7.09 MB |
| Case Study: Pipeline Restoration At A Generating Station Using Chemical Grout |
This article derscribes the repair of a 75-ft (23-m)deep, gravity-flow water inlet pipeline to stem the inflow of ground-water into the pipe. By C. KARL Sauereisen, Vice President, Sauereisen, Inc., Pittsburgh, Pennsylvania |
07/01/2009 |
1.95 MB |
| Datasheet: PACSystem RX3i |
The PACSystems RX3i controller is the latest addition to the innovative PACSystems family of programmable automation controllers (PACs). |
06/30/2009 |
160.4 KB |
| Brochure: PACSystems |
Imagine bringing all the components of your control system together. GE Fanuc’s revolutionary PACSystems controller gives you that power, with a unique architecture that combines unmatched flexibility, openness and performance to help you meet your greatest manufacturing and production challenges.
|
06/30/2009 |
1.38 MB |
| Datasheet: Proficy Real-Time Information Portal |
Proficy Real-Time Information Portal is GE Fanuc Intelligent Platforms’ breakthrough real-time manufacturing intelligence application, allowing you to gain business insight from all of your plant data in real time. |
06/30/2009 |
1.46 MB |
| Datasheet: Proficy Historian |
Creating an enterprise resource planning system for manufacturing is an important step to building a more efficient and productive business. |
06/30/2009 |
1.19 MB |
| Datasheet: Proficy Workflow |
Industrial Business Process Management digitizes and streamlines your production – from your work instructions and SOPs to corrective action and HACCP monitoring. You can integrate your business and production processes across systems and departments for reliable, repeatable process execution. |
06/30/2009 |
1.22 MB |
| Brochure: Proficy Software |
Every day, you face real challenges in your operations that can dramatically impact the overall performance of your business—whether it’s a single site or an extended enterprise. Customer demands, disparate processes and systems, regulatory standards and a host of other issues all add complexity to your operations on a daily basis. |
06/30/2009 |
3.64 MB |
| Brochure: GE Fanuc Process Solutions |
In today’s competitive business environment, companies in hybrid and continuous process industries face complex challenges. |
06/30/2009 |
3.06 MB |
| Datasheet: Water Solution Pack 2008 |
Combining extensive water industry expertise, advanced technologies and a market leadership position, GE Fanuc Intelligent Platforms offers the Water Solutions Pack 2008 — a powerful offering designed to help you reduce costs, improve quality and secure your operations for a sustainable advantage. |
06/30/2009 |
1.13 MB |
| Datasheet: Proficy SCADA/HMI - iFIX 5.0 |
iFIX offers a robust SCADA engine, rich set of connectivity options, open architecture and highly scalable and distributed networking model. |
06/30/2009 |
943.4 KB |
| Case Study: Overcoming Water Scarcity Challenges On Providenciales Island |
The residents and industries of Providenciales Island are completely dependent on fresh water produced by a single desalination plant. In 2007, ITT Flowtronex was hired to replace the plant’s overworked pumping system and add a booster pumping station to the distribution system. One of the challenges they faced in designing controls for the system was how to maintain the public water supply while the island’s undersized ground water storage tanks were removed and replaced with a large single tank in the same location, a three to four month process. By Richard Embry and Christopher Little |
06/30/2009 |
2.20 MB |
| Brochure: Addressing The Needs Of Tomorrow |
This guide is intended to provide information to help answer
some of your toughest questions regarding water and wastewater
treatment operations and improvements with solutions that
are cost- and energy-efficient, and help to provide for a
sustainable future. |
06/29/2009 |
546.4 KB |
| Case Study: Flagstaff, AZ |
In order to achieve more stringent effluent limits, the City of Flagstaff worked with Black and Veatch to upgrade the Wildcat Hill Wastewater Treatment Facility, located in northern Arizona. The facility produces a high quality effluent, as well as reclaimed water, which is distributed throughout the region to construction companies and golf courses. The remaining treated water is discharged into the Rio de Flag Creek. The plant has a design influent annual average flow of 6.0 MGD. By Veolia Water Solutions & Technologies |
06/29/2009 |
371.8 KB |
| Video: Mixed Oxidants Show Significant Biofilm Removal In Distribution Line |
New MIOX® video dramatically demonstrates the advantages of mixed oxidants over sodium hypochlorite in the water distribution system. |
06/26/2009 |
23.98 MB |
| Datasheet: Ashcroft Type 5503 Differential Pressure Gauge |
The Ashcroft Type 5503 differential pressure gauge provides reliable low differential pressure measurement in high static, wet-wet pressure applications. Equipped with wetted materials of 316SS, Monel or Hastelloy C, the rugged Type 5503 D/P pressure gauge is specifically designed to monitor a wide variety of caustic liquids and gases. |
06/26/2009 |
307.6 KB |
| Case Study: U.S. Army Deploys New Generation Of Water Purification Technology: Ultrafiltration Pretreatment For Portable Water Purification Unit |
The United States Army is utilizing state-of-the-art membrane water purification technology to
support highly mobile military operations and humanitarian missions. Mechanical Equipment Company Inc. (MECO), of Sugar Land, Texas, has designed a Lightweight Water Purifier
(LWP) that can be easily transported to remote locations to produce safe drinking water from
almost any available raw water, including highly-turbid surface water, brackish water and
seawater. By Koch Membrane |
06/26/2009 |
174.5 KB |
| White Paper: Interpreting The Buy American Provision Of The American Recovery And Reinvestment Act Of 2009 For The Purchase Of Water Meters And Meter Reading Systems |
This paper will provide for guidance interpreting the “Buy American” requirements of the American Recovery and Reinvestment Act of 2009 (the “ARRA”). The purpose of the ARRA is to provide federal capital funding for infrastructure projects that should stimulate both local and national economies. The ARRA’s “Buy American” provision requires that the federal money is spent, not just on projects in the United States, but also on United States manufactured or produced materials for the projects. By Neptune Technology Group Inc. and Bradley Arant Boult Cummings LLP |
06/25/2009 |
98.2 KB |
| Brochure: On-Line Total Organic Carbon Analyzer - Model 9210e (Electrochemical Oxidation) |
OI Analytical introduces the Model 9210e On-Line Total Organic Carbon (TOC) analyzer. The 9210e employs an innovative electrochemical oxidation technique with Solid State Non-Dispersive Infrared detector (SSNDIR) technology to monitor TOC levels in process water streams. |
06/25/2009 |
5.43 MB |
| Brochure: On-Line Total Organic Carbon Analyzer - Model 9210p (Wet Chemical Oxidation) |
OI Analytical introduces the Model 9210p On-Line Total Organic Carbon (TOC) analyzer. The 9210p uses proven heated persulfate oxidation with Solid State Non-Dispersive Infrared detector (SSNDIR) technology to monitor for organic contaminants in water streams for regulatory compliance and optimization of water treatment processes. |
06/25/2009 |
4.87 MB |
