Stormwater Products And Services

  1. Brochure: StormceptorMAX Large Capacity System
    8/14/2008
    The StormceptorMAX responds to the needs of large-scale industrial and residential areas which may require a single stormwater management device. It provides stormwater quality treatment for areas 20 to 100+ acres and industrial spill volume capture of 15,000+ gallons.
  2. Filtration; Stormceptor Oil & Sand Removal (OSR) System
    8/14/2008
    The Stormceptor Oil & Sand Removal (OSR) Filtration system is designed to remove fine sand particles and separate oil at the peak flow rates regulated by bodies such as the New Jersey Department of Environmental Protection (NJDEP) and the New York State Department of Environmental Conservation (NYSDEC). Recommended applications include pre-treatment and redevelopment/retrofit projects to meet a specific water quality objective in the filtration and separation of sand and oil.
  3. Stormceptor Extended Oil Storage (EOS) System
    8/14/2008
    For any business involved in the handling of petroleum hydrocarbons, the threat of spills is serious. The Ontario Ministry of the Environment’s Spills Action Centre (SAC) recorded 2,516 hydrocarbon spills in 2006 (crude gasoline, jet fuel, kerosene and petroleum oils). That’s seven spills every day. Accidents happen. Protect the environment and protect your business from costly clean-up, remediation, litigation and fines with the Stormceptor Extended Oil Storage (EOS) system.
  4. Brochure: EnviroTrap Stormwater Treatment System
    4/28/2008
    The EnviroTrap Stormwater Treatment System is a Catch Basin Insert that can be installed on any new catch basin or retrofitted on any existing catch basin with a sump. The EnviroTrap gives you the ability to convert any round, square, or rectangular structure into a Stormwater Best Management Practice to capture floatables, hydrocarbons, and coarse sediment
  5. Brochure: UniScreen Stormwater Treatment System
    4/28/2008
    The UniScreen Stormwater Treatment System provides primary treatment of stormwater using locally available precast manholes and vaults. The UniScreen incorporates a dual function insert. One function is to trap mutually buoyant solids, the other is to act as a flow diffuser /distributor and improve the removal of TSS, floating oils, and debris
  6. Brochure: V2B1 Stormwater Treatment System
    4/17/2008
    The V2B1 Stormwater Treatment System provides primary treatment of Stormwater using locally available Precast manholes and pipe. The tangential inlet pipe provides optimum swirl distribution for sediment separation.
  7. Brochure: UniStorm Stormwater Treatment System
    4/17/2008
    The “UniStorm” Stormwater Treatment System provides primary treatment of stormwater using locally available Precast manholes (UniStorm-R) and vaults (UniStorm-V)
  8. HYDROVEX® FluidSep Vortex Separator
    4/3/2008
    The HYDROVEX® FluidSep Vortex Separator is a tool in the treatment of CSO and Stormwater. The treatment relies on the properties of the controlled vortex to eliminate settleable suspended solids, as well as floatables carried by the incoming water
  9. Brochure: HYDROVEX® FluidSep Vortex Separator
    4/3/2008
    The HYDROVEX® FluidSep Vortex Separator is a tool in the treatment of CSO and Stormwater. The treatment relies on the properties of the controlled vortex to eliminate settleable suspended solids, as well as floatables carried by the incoming water
  10. Ultrameter II 6P™
    3/19/2008
    Both Ultrameter II models deliver performance of ±1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor-based circuitry